DIN Rail Mounts

DescriptionDIN Rail Mounting ClipsPrint-in-place spring and slideAccepts M3 threaded insertsTwo sizes offered with 40x30mm or 30x30mm threaded insert hole patterns This was designed to support a 16 bay rack to hold RC Snubbers sold by Shelly. I'll post that model too after it is put into service and is validated.Printing0.4mm Nozzle0.2mm Layer HeightPLA, Dual Color for text, 3 color changesText is a separate component, but don't delete it (will leave holes in the clip).To print in single color, make it the same color as the clip.Parameters above are set in the print profilesPost-PrintingThe print-in-place spring latch on the DIN Mount will need to be broken free. If it doesn't with a little bit of finger pressure, use a small screw driver in the chamfered areas indicated in the picture above. Allow the clip to cool completely beforehand to avoid spring memory loss. As with all horizontally mounted DIN Rail devices, you'll want to orient the clip on the bottom side of th