Thingiverse
Tools
Model downloaden
DIN Rail Stand v2
854
Downloads
563
Likes
16
Makes
This stand helps you to use a 35x7.5mm DIN rail on your desktop for prototyping, testing, etc.
It's a remix of [DIN Rail Stand by dev67](http://www.thingiverse.com/thing:1691998). There are three minor modifications:
- Use of an intermediate tolerance of the din rail cutout,
- an additional hole to secure the rail with a screw, and
- slightly slimmer stands.
With the intermediate tolerance in the cutout, my printed version fits snugly after pushing the DIN rail in. To further secure the rail, I included a tap hole of 3.3mm to cut an M4 screw thread into it (if you have a die at hand). There is enough space to use an 9mm wide washer when securing the rail with the M4 screw.
Please note that this thing is made for the regular DIN rails (35x7.5mm), not the deep ones (35x15mm).
It's a remix of [DIN Rail Stand by dev67](http://www.thingiverse.com/thing:1691998). There are three minor modifications:
- Use of an intermediate tolerance of the din rail cutout,
- an additional hole to secure the rail with a screw, and
- slightly slimmer stands.
With the intermediate tolerance in the cutout, my printed version fits snugly after pushing the DIN rail in. To further secure the rail, I included a tap hole of 3.3mm to cut an M4 screw thread into it (if you have a die at hand). There is enough space to use an 9mm wide washer when securing the rail with the M4 screw.
Please note that this thing is made for the regular DIN rails (35x7.5mm), not the deep ones (35x15mm).
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
