DIN14 plug for ATARI ST & AMSTRAD PC

This is a complete replacement for DIN14 plug used in Atari ST, Atari PC and Amstrad PC1512 & PC1640 computers. Which is a quite expensive connector when you try to buy few for your computers, but with thşs you can make your own connectors for less than 5 euros each. Pin diameter should be 1,7 mm, you could extract pins from any standart DIN connector, such as 2 DIN7 connectors. Screw is 1.2x5 or 2x5. If you're gonna print multiple of this connector you just need to print the “pin alignment tool” just once, we are using it to hold and align pins while making the connector.0.2mm NOZZLE IS A MUST, OTHERWISE IT WON'T WORK!!!PRINT “BASE” AND “ALIGNMENT TOOL” WITH ABS OR ASA , OTHERWISE THEY WILL MELT WHILE SOLDERING. You can print the “case” in any material except PLA becaue PLA may break down during use. Things you will need:3d printed partsSome DIN connectors to extract pins fromsmall knifelightersuper glueneedle nose pliers Assembly:1: Extract the pins from the DIN connectors: h