Diode Laser Kit

I built a diode laser with a bit of hardware, and 3d printed parts. I have really been enjoying it, so I thought I would share it here. Here are the non-printed parts:3x NEMA 17 stepper motors2x 20mm googley eyes1x laser tree K20 diode laser with air pump2x 20x20 vrail for the y axis1x of 20x40 vrail for the x axis3m GT2 belt (depends how big you want it!)3x GT2 20 tooth timing pulley with a 5mm bore1m 10x10 e-chain12x vroller bearings with spacers (I used the small dia ones)M5 screws (I used button head, 4x 30mm, 8x 20mm, ~10x 8mm)M3 screws for stepper motorsA GRBL 3axis stepper controller board, 24v power supply, and drive software (I used lightburn)You will need an M5x0.8 Tap to tap the plastic where the M5 screws are used. I replace the cover for the K20 Laser to reduce the weight, and provide a dovetail interface to the carriage. Let me know if you have any issues, and I may be able to help you build one.