Thingiverse
Dipole Antenna support
di Morgoth66629
4
Download
10
Likes
0
Makes
A simple 120° dipole antenna support for 6.1mm aluminium rod.
I made it to use with and SDR dongle and "listen" to the ISS on 145Mhz.
You have to print the STL twice.
Put the aluminium rod in the 2 part support and drill directly with a 3mm drill bit.
Use 3mm*25mm metallic bolt to do the contact to the coax cable.
Use 4mm*25mm to clamp the two parts.
For 145 MHz, use 50cm aluminium rod.
More infos here : https://www.youtube.com/watch?v=9WNmhfpWxdk
I made it to use with and SDR dongle and "listen" to the ISS on 145Mhz.
You have to print the STL twice.
Put the aluminium rod in the 2 part support and drill directly with a 3mm drill bit.
Use 3mm*25mm metallic bolt to do the contact to the coax cable.
Use 4mm*25mm to clamp the two parts.
For 145 MHz, use 50cm aluminium rod.
More infos here : https://www.youtube.com/watch?v=9WNmhfpWxdk
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!