Thingiverse
DiscoUltimate CameraPi arm
door yapbreak
2
Downloads
0
Likes
0
Makes
This is a basic arm to attach camera pi to the Dagoma DiscoUltimate's plate.
To be assemble, you need 4 M3x10 bolts, 4 M3x25 bolts and 6 nuts.
You can find all elements in all_in_one.stl or each parts in separated stl.
All separated element must be printed once, except chain_picam.stl that must be printed at least 3 times.
Since I use an infrared cameraPi, I added place to setup 6 10mm infrared led around camera.
To be assemble, you need 4 M3x10 bolts, 4 M3x25 bolts and 6 nuts.
You can find all elements in all_in_one.stl or each parts in separated stl.
All separated element must be printed once, except chain_picam.stl that must be printed at least 3 times.
Since I use an infrared cameraPi, I added place to setup 6 10mm infrared led around camera.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
