Dish/Plate Stacker

A simple Dish/Plate organizer for your cupboard. Made it adjustable so you can print extra middle pieces to make it wider if needed. Should be able to go more than 2 center pieces. Haven't tried more, as 2 were enough for me. Ended up making the risers for the legs that add an extra 40mm in height since it wasn't tall enough once I put all my dishes under. These aren't necessary but are there if you need the extra height. I made the tolerance for the guides that run through middle .5mm smaller which made it pretty easy to put everything together. Unless you scale the size of these up, I would suggest putting a bit of glue between each top piece. I haven't glued mine and has been working fine. I do have mats in all my cupboards so that could be helping in keeping it from slowly coming apart. Each section is 55mm wide, so 165mm wide with 1 center piece and 220mm wide with 2 center pieces installed. I have the risers on their own plate in the profile. If using a x1c equiva