Display for Home Assistant

- Simple display to show data from Home Assistant with ESPHome
- In this project, an ST7735 display is used to show data from Home Assistant.
- An ESP32-C3 module is used as the microcontroller.

Wiring:

ST7735 | ESP32-C3
-
___________________
VCC | 3.3V
___________________
---------------------------
GND | GND
___________________
---------------------------
CS | GPIO05
___________________
---------------------------
RESET | GPIO02
___________________
---------------------------
AO | GPIO04
___________________
---------------------------
SDA | GPIO06
___________________
---------------------------
SCK | GPIO07
___________________
---------------------------
LED | 3.3V
___________________
---------------------------
It is best to use 8cm long cables

Explanations:
-

-


- Wiring: The table shows the connections between the ST7735 display and the ESP32-C3 module.