Disto S910 Manhole Brace

These prints are designed to fit on a 40x20mm aluminium extrusion to place a disto S910 in the centre of a MH for easy measure downs/dips. I'd recommend printing it in a very robust plastic - I use Nylon+CF. Print the clamp piece with the chamfer section on the build plate and then you won't need supports. You need 2 handle part 1, and two feet. IIRC it uses M5x15mm and M5x30mm nuts and bolts, as well as a ¼" x 25mm bolt for the Disto.