Thingiverse
"Diva" type Wave Motion Machine
por Emeduza
1
Descargas
0
Likes
0
Makes
This my version of the "Diva" type Wave motion machine base for 3D-printing.
It is inspired by this video by Techmoan and Hughes Wave Motion Machines LLC:
See it her: https://youtu.be/7v8Auu8-x4g?si=R0bUpPrlR2MHVDsx
https://youtu.be/2mJL152QdS8?si=3foDB3RRzKUrhMUc
https://youtu.be/mYDgs9QXTFg?si=OhlT-AkCR4f_tk6O
The Inner plates and the crank disc needs to be printed in PETG or other materials that withstands a littlebit more heat than PLA since the motor gets qite hot. The outer shell can be printed in PLA.
The two outer shells needs to be glued together. Same with the two bottom plates, Cradle and resting points.
The raisers needs to be glued inside the cradle but the two resting points shall not be glued to the raisers, It needs to be detachable so the outer shell can be fitted. When you have sentered the vessel you can glue them to the vessel instead
This is what you need buy:
Motor 8-10rpm with C-type shaft: https://www.aliexpress.com/item/1005001305529072.html?spm=a2g0o.order
It is inspired by this video by Techmoan and Hughes Wave Motion Machines LLC:
See it her: https://youtu.be/7v8Auu8-x4g?si=R0bUpPrlR2MHVDsx
https://youtu.be/2mJL152QdS8?si=3foDB3RRzKUrhMUc
https://youtu.be/mYDgs9QXTFg?si=OhlT-AkCR4f_tk6O
The Inner plates and the crank disc needs to be printed in PETG or other materials that withstands a littlebit more heat than PLA since the motor gets qite hot. The outer shell can be printed in PLA.
The two outer shells needs to be glued together. Same with the two bottom plates, Cradle and resting points.
The raisers needs to be glued inside the cradle but the two resting points shall not be glued to the raisers, It needs to be detachable so the outer shell can be fitted. When you have sentered the vessel you can glue them to the vessel instead
This is what you need buy:
Motor 8-10rpm with C-type shaft: https://www.aliexpress.com/item/1005001305529072.html?spm=a2g0o.order
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
