Thingiverse
DiveTools Gas Blending Pi Case
por pulledover
7
Descargas
7
Likes
0
Makes
Remix to support an open source electronics project found at:
https://github.com/divetools/Gas-Blending
This tools is designed to look at the gas mixture before or after a scuba compressor and give the O2 and He content. This is for test purposes. More info on the GitHub page.
The remix of this case makes it able to support a RPi 3 or RPi4. I've also added four 3.5mm jacks to the top to support the ADC being used for the project.
I used 3mm screws without nuts for the RPi and ADC.
https://github.com/divetools/Gas-Blending
This tools is designed to look at the gas mixture before or after a scuba compressor and give the O2 and He content. This is for test purposes. More info on the GitHub page.
The remix of this case makes it able to support a RPi 3 or RPi4. I've also added four 3.5mm jacks to the top to support the ADC being used for the project.
I used 3mm screws without nuts for the RPi and ADC.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!