Diving Camera Tray for compact cameras

This is an easy to print 5 part dive tray. You may attach lights with flex tubes to the handle bars if needed. I have joined the parts by inox screws for longer lasting parts. I used the tray for several salt water dives down to 43m / 140ft max depth. The tray did not pick up water and could withstand a test at land held at only one handle with camera + 2 lights attached.
The wider base makes the tray quite stable under water. So when filming you will have less shake.

What you need:
4x M6x25mm
4x M6 nuts
2x 6x60mm or 6x70mm (mounting the bars to the tray extensions)
several 6mm washers
2x rubber bicycle handle bar grips for 22mm bars
1-3x 1/4" UNC tripod mount screws, 15-20mm long (depending on your camera case)

optional for lights:
2x 5x50mm (mounting the pipe caps to the bars)
2x 3/4" pipe caps with 5mm hole drilled in center
2x 3/4" flex pipes / coolant pipes
2x 5mm washers
2x 22mm rubber washers to stop tubes from rotating in the cap

The lights seen in the pho