Diy 3d printed CNC Machine

This is a 3d printed CNC Machine, it has a similar design philosophy as the generic 3018 machines. It uses a mix of mechanical and 3d printed parts.All the 3d printed parts are shared as STLs, and a Bambu Lab print file has also been been attached.The picture of the Final assembly is shown below ASSEMBLYAssemble the Frame in the given pictureAttach bearings to the Y-Axis and fit is inside the frame in the given picturesIf the bearings are tight, use sandpaperIf the bearings a loose, take tissue paper (as a filler) and surround the hole with it and fit the bearings.The 380 mm extrusions run across right to left, giving the width of the machineThe 340mm extrusions run along the x-axisThe 280mm extrusion run from bottom to top, giving the heightThen attach all the corner bracket pieces with M4 SHCS screw (6mm length) washer and t nuts. Attach the vertical supports, or the Long L bracket with M5 screws and t nutsAttach the Side mounts for the y axis.<figure class="image