Thingiverse
DIY 3D Printer: Gem Maker v2
por msufred1991
5
Descargas
10
Likes
0
Makes
Inspiration for Building
I decided to rebuild my home-built 3D printer, the Gem Maker v1 and I really like the Prusa's sturdy design. So I built my own but only using 1x1 inch square tubings as frame. I really wanted to use aluminum extrusions but it is not accessible here at my place. Currently Im using 8mmx300mm linear rods and cold bed (glass). In the future I'll be using longer rods and a heated bed.
Features
uses direct drive extruder setup
uses servo for bed levelling
you can expand the working area by replacing longer linear rods
If you built this thing, please post a make. Also, do not hesitate to ask me some questions. Thanks!
UPDATE:
December 27, 2019 - added servo_arm.stl
I decided to rebuild my home-built 3D printer, the Gem Maker v1 and I really like the Prusa's sturdy design. So I built my own but only using 1x1 inch square tubings as frame. I really wanted to use aluminum extrusions but it is not accessible here at my place. Currently Im using 8mmx300mm linear rods and cold bed (glass). In the future I'll be using longer rods and a heated bed.
Features
uses direct drive extruder setup
uses servo for bed levelling
you can expand the working area by replacing longer linear rods
If you built this thing, please post a make. Also, do not hesitate to ask me some questions. Thanks!
UPDATE:
December 27, 2019 - added servo_arm.stl
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
