Thingiverse
DIY AeroGarden Nutrient Sensor
door veng1
15
Downloads
9
Likes
0
Makes
This is a demonstration of sensing nutrient of water levels using a VL53L4CD sensor from Adafruit. The intention is to accurately measure to 1mm resolution who much liquid is in a plant reservoir such as the DIY AeroGarden I've designed.
The stl is specifically designed to fit a hole built into the lid but the Fusion file is included so it can be adjusted for other applications.
The pictures show when the reservoir is empty, after adding nutrient, when the level is at the bottom of the seed pod, at a normal level and when over filled. The seed pods need some space at the top for the air roots to breathe and above the distance, the reservoir is overfilled.
The display is an Adafruit PyPortal which is mounted in one of their published 3D printed cases that I modified somewhat.
https://learn.adafruit.com/adafruit-vl53l4cd-time-of-flight-distance-sensor
https://www.adafruit.com/product/4116
https://learn.adafruit.com/pyportal-guitar-tuner/overview
The sensor also works w
The stl is specifically designed to fit a hole built into the lid but the Fusion file is included so it can be adjusted for other applications.
The pictures show when the reservoir is empty, after adding nutrient, when the level is at the bottom of the seed pod, at a normal level and when over filled. The seed pods need some space at the top for the air roots to breathe and above the distance, the reservoir is overfilled.
The display is an Adafruit PyPortal which is mounted in one of their published 3D printed cases that I modified somewhat.
https://learn.adafruit.com/adafruit-vl53l4cd-time-of-flight-distance-sensor
https://www.adafruit.com/product/4116
https://learn.adafruit.com/pyportal-guitar-tuner/overview
The sensor also works w
veng1 publiceert ook op
25 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!