Thingiverse
DIY CNC CASE
von Bart-tech3D
3
Downloads
5
Likes
1
Makes
This is a DIY case for controlling a hobby CNC machine.
The design is conceived in such a way that the case is assembled from individual boards and thus it is possible to have access from any side during assembly or revision.
Another advantage is the possibility of printing with self-extinguishing ABS without the need for a closed printer (chamber).
To print, you need a printer with a larger print area.
M3 nuts need to be inserted in the MCU holder (shelf) when printing.
The case is compatible with all drivers for example TB6600 or close loop e.g. CL57T and MCU boards - now I use MKS GENL V1 (case reduction is also here for this board).
Assembly is with Phillips 3x8 plastic screws and in the corners DIN912 (M3x12) - I cut the thread for these.
The design is conceived in such a way that the case is assembled from individual boards and thus it is possible to have access from any side during assembly or revision.
Another advantage is the possibility of printing with self-extinguishing ABS without the need for a closed printer (chamber).
To print, you need a printer with a larger print area.
M3 nuts need to be inserted in the MCU holder (shelf) when printing.
The case is compatible with all drivers for example TB6600 or close loop e.g. CL57T and MCU boards - now I use MKS GENL V1 (case reduction is also here for this board).
Assembly is with Phillips 3x8 plastic screws and in the corners DIN912 (M3x12) - I cut the thread for these.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!