DIY Curing Chamber

I built myself a curing chamber out of 30x30cm mirror tiles with a thickness of 3mm. Print 4 pcs of 2way edge connectors, 4 pcs of 3way connectors and at least 8 pcs of stands and if you like 2 handles so you can place the chamber over the parts to cure.I superglued the cured connectors to the back of the mirror tiles. The stands are for when you have a lamp with a power supply outside and a cable, so they leave a gap for the cable. I decided against a handle to glue to the top of the chamber and created a handle you can glue to the lower part of the tiles for better carrying. Later I upated the curing chamber with internal LED UV-light strips.