Thingiverse
DIY Hexaleaf
di Tesafilm04
167
Download
113
Likes
1
Makes
This is my current project Diy Hexaleaf.
How do you rebuild it?
First, print as many panels (base and diffuser) as you want.
Next, cut your Led Stripes (WS2812b, 60 Leds/m) into pieces that have 20 leds and glue them into the boxes and solder everything.
Then print the control box and stick a Wemos D1 Mini with the Wled software in it.
Finally, just connect the power and your own Hexaleaf project is ready.
I hope everything is understandable and you have fun building the project yourself.
How do you rebuild it?
First, print as many panels (base and diffuser) as you want.
Next, cut your Led Stripes (WS2812b, 60 Leds/m) into pieces that have 20 leds and glue them into the boxes and solder everything.
Then print the control box and stick a Wemos D1 Mini with the Wled software in it.
Finally, just connect the power and your own Hexaleaf project is ready.
I hope everything is understandable and you have fun building the project yourself.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!