DIY Joystick - Parametric

I wanted a joystick i could use with games like farming simulator or flight simulator, but i didn't want to buy one since i am planning to incorporate it into a farm sim side panel. And i find it fun making my own stuff.Printing:The only models that require supports are the ones that have 3mf files.Parts:Arduino Pro Micro: Or any Arduino with the ATMega32U4 chip.Hall effect sensor x2: Make sure the sensor you are buying is linear. The one i have is S49E, but there are multiple different models.Bearings x4: If you are planning to use the stock .stl files provided without modifying the parameters in CAD then u have to use 625zz bearing. However if you have different bearings just open the CAD file and change the bearing dimensions to suit yours.Springs x4 or x8: I used two 25 mm springs for each corner, but you can use whatever springs you want based on the stiffness you want, you could even use rubber bands.Jumper wiresDupont connectorsScrews: You need 4 screws that are the same dia