Thingiverse
DIY Smart Doorbell
door llite47
160
Downloads
99
Likes
1
Makes
A low cost (sub $20) smart doorbell based around the "TTGO T-Camera ESP32".
Features:
* Live video feed
* OLED screen
* PIR motion sensor
*Firmware is based on ESPHome, so a home-assistant install is required.*
Required parts:
* TTGO T-Camera ESP32 (fish-eye version)
* cherry mx style switch
* us #8 or similar countersunk screw (2x)
* m3x6 bolt and threaded insert (at least 2)
* short bit of cable to connect switch to esp32
* some sort of way to power it
Most likely isn't waterproof so probably install somewhere it won't get wet.
example esphome [config](https://github.com/llite/smart-doorbell/blob/c3d585f3dc503d16a544d0677c809e690a1f6fdc/example-esphome-config)
Features:
* Live video feed
* OLED screen
* PIR motion sensor
*Firmware is based on ESPHome, so a home-assistant install is required.*
Required parts:
* TTGO T-Camera ESP32 (fish-eye version)
* cherry mx style switch
* us #8 or similar countersunk screw (2x)
* m3x6 bolt and threaded insert (at least 2)
* short bit of cable to connect switch to esp32
* some sort of way to power it
Most likely isn't waterproof so probably install somewhere it won't get wet.
example esphome [config](https://github.com/llite/smart-doorbell/blob/c3d585f3dc503d16a544d0677c809e690a1f6fdc/example-esphome-config)
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
