Thingiverse
DIY USB-UART adapter with galvanic isolation
door daumemo
8
Downloads
10
Likes
0
Makes
Home-made USB-UART adapter with galvanic isolation. Handy tool when you need one, especially when working with devices with direct connection to mains...
After printing, Plexiglas inserts were hand cut and glued into Top part slits(used for LED indication) and whole housing was hand sanded flush so Plexiglas won't stick out.
More info about this thing you can find in [my blog post](https://daumemo.com/diy-galvanically-isolated-usb-uart-adapter/)
Files for the PCB can be found at [GitHub](https://github.com/daumemo/USB-UART-with-galvanic-isolation)
After printing, Plexiglas inserts were hand cut and glued into Top part slits(used for LED indication) and whole housing was hand sanded flush so Plexiglas won't stick out.
More info about this thing you can find in [my blog post](https://daumemo.com/diy-galvanically-isolated-usb-uart-adapter/)
Files for the PCB can be found at [GitHub](https://github.com/daumemo/USB-UART-with-galvanic-isolation)
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!