Django poster - hueforge

Hueforge of Django posterThe photos shows the result in 134.98x200mm and a nozzle of 0.4Boost MeThanks for your boost and your support!You can change the X and Y dimensions but do not change the Z dimensions You must define the printing parameters indicated in the description below and change the filament at the specified heights. You can use filaments other than those indicated, but the result will differ. You can use any black PLAHueforge descriptionPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.2mmThe Model is 134.98x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.8mmThe Max allowed Thickness is 2.68mm and the Actual Thickness is 2.12mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4This print uses 4 unique filamentsSwap Instructions: