DJI 04 Lite Camera Case

DESCRIPTION:
This is a loosely on another design for the camera, However when I actually got my DJI 04 Lite in the camera did not fit in the case. So this has been redesigned from scratch and the transmitter case I just was not happy with so I completely redesigned it to my own design. The camera will fit in this case with or without the lens cover on the camera. The camera case mounting screws on the side are the same 16mm spacing as the DJI Pro camera. Transmitter Mounting holes are 25.5mm x 25.5mm.

The transmitter case is designed to use with 2x6mm rubber dampeners that came with the camera. Used 2mm screws ( I can't remember if I used 2x10mm or 2x12mm) to put it all together. The camera case is designed to be the same width as the DJI 04 Pro camera hopefully simplifying interchanging the units.

PRINTING: does need supports for the transmitter box. The camera case does not have to have supports if printed with the lens side down on the build plate. I recommend using PETG, ASA, o