Thingiverse
DJI action4 车把夹
von NNJS
1
Downloads
0
Likes
0
Makes
适用于大疆action系列转接
需要准备1.M5螺母（或拆除原来螺母）2.魔术贴30mm宽 3. 5mmx2mm磁铁x4（可以没有）
最小绑定20mm圆柱
建议使用abs↑以上材料打印
由那年九岁设计,设计已验证。
详情可参看https://nnjs.xyz/zh/ACTION4PJ 可联系九岁
Compatible with DJI Action series adapters
Need to prepare1. M5 nut (or remove the original nut) 2. Velcro 30mm width 3. 5mmx2mm magnet x4 (can be without)
The minimum binding is 20mm cylinder
It is recommended to use ABS↑ or above materials for printing
Designed by NNJS, design verified.
Details can be found here https://nnjs.xyz/zh/ACTION4PJ ←Contact NNJS
需要准备1.M5螺母（或拆除原来螺母）2.魔术贴30mm宽 3. 5mmx2mm磁铁x4（可以没有）
最小绑定20mm圆柱
建议使用abs↑以上材料打印
由那年九岁设计,设计已验证。
详情可参看https://nnjs.xyz/zh/ACTION4PJ 可联系九岁
Compatible with DJI Action series adapters
Need to prepare1. M5 nut (or remove the original nut) 2. Velcro 30mm width 3. 5mmx2mm magnet x4 (can be without)
The minimum binding is 20mm cylinder
It is recommended to use ABS↑ or above materials for printing
Designed by NNJS, design verified.
Details can be found here https://nnjs.xyz/zh/ACTION4PJ ←Contact NNJS
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
