Thingiverse
DJI Controller Tablet Adapter
von itsnotlevel
37
Downloads
37
Likes
0
Makes
****This could easily be changed at any time, as I may need to tweek it depending on how long this one lasts****
I got a DJI Spark a week ago and have been using my nexus 5x with the controller. I have a Nexus 7 tablet I rarely use but it doesnt fit in the spark controller arms. So I modeled up a fake Nexus size block and two posts with a bracket on top that fits the Nexus 7 well....*Note, I added 2% to the print in slicing to make up for some shrinkage and it was spot on*.
I printed it today and just used it tonight. I had some screws laying around..3/4" #4 (sheet metal or wood screws are fine), with counter sunk heads. Used a counter sink bit to the printed holes to make them fit just right on the top and bottom pieces. 4 screws total. Printed in PETG.
View in OnShape: https://cad.onshape.com/documents/69057d51bc0b35a6b7eef7eb/w/5b144210a157a733396063a4/e/6800ac592d0402424c93f4b1
I got a DJI Spark a week ago and have been using my nexus 5x with the controller. I have a Nexus 7 tablet I rarely use but it doesnt fit in the spark controller arms. So I modeled up a fake Nexus size block and two posts with a bracket on top that fits the Nexus 7 well....*Note, I added 2% to the print in slicing to make up for some shrinkage and it was spot on*.
I printed it today and just used it tonight. I had some screws laying around..3/4" #4 (sheet metal or wood screws are fine), with counter sunk heads. Used a counter sink bit to the printed holes to make them fit just right on the top and bottom pieces. 4 screws total. Printed in PETG.
View in OnShape: https://cad.onshape.com/documents/69057d51bc0b35a6b7eef7eb/w/5b144210a157a733396063a4/e/6800ac592d0402424c93f4b1
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
