Thingiverse
DJI Mavic Pro Drone Accessory Mount
door Nother_Ngineer
26
Downloads
18
Likes
0
Makes
Clip-on mount for attaching accessories to a DJI Mavic Pro drone such as my Universal Drone Bait Drop ( https://www.thingiverse.com/thing:4332137 ).
Holes allow for some air circulation around the battery, visibility of the LEDs, a little weight reduction, and wire-tie attachment. The optional extension piece allows accessories to be mounted at a lower or position relative to the battery pack.
Fit is highly dependent on your extrusion ratio -- there is a little clip but it should be tight (or can be glued if too loose).
(Updated 5/7/20: Reduced inside width by 0.5mm (to 59.5mm) for a more snug fit on the battery.)
Holes allow for some air circulation around the battery, visibility of the LEDs, a little weight reduction, and wire-tie attachment. The optional extension piece allows accessories to be mounted at a lower or position relative to the battery pack.
Fit is highly dependent on your extrusion ratio -- there is a little clip but it should be tight (or can be glued if too loose).
(Updated 5/7/20: Reduced inside width by 0.5mm (to 59.5mm) for a more snug fit on the battery.)
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!