DJI O4 Camera Adapter

Important
=========
I have included the `.step` file in the download so this design can be easily modified for individual frames.
**No attribution is required** if you also include the `.step` file for others when you modify the design.
Let’s pay it forward!

---

Overview
--------
This is a camera adapter that converts the **16mm hole spacing** to **6mm hole spacing**.

- **Mounting Holes**: The holes are **1.8mm**, designed to fit **2mm screws**.
- **Important Note**:
Mount the adapter *before* threading the holes for screws.
**Take it slow** during installation, or the adapter may crack.

---

Additional Notes
----------------

### Placement of Holes
The holes are positioned where the internals of the camera are slightly less tight.
If you decide to add **2mm holes**, proceed at your own risk.
The gap is only **1.4mm**, so there isn’t much room for error regarding screw length.

### Frame Width Modifications
- When modifying the width for different frames, **extrude