Thingiverse
DJI Tablet Mount
51
Descargas
33
Likes
0
Makes
This is a tablet mount I designed for my Galaxy Tab S3 and the controller for the DJI Mavic Pro. I designed it in Fusion 360 and then 3D printed it. I ask that if you download, print, and enjoy the design yourself consider leaving a tip. Getting everything just right took a fair amount of time. Please do not use the design for profit. Here's some of the specific info for the mount:
Mounts to any GoPro Mount
Four 10mm screws are needed, 2 are optional. You will also need 4 nuts. Hex is required for the adjustment portion, but square will work on the bottom plate as well as the optional controller mount portion.
One 25mm screw for the bottom plate
The springs are
2 springs 22mm x 9.5mm, 7.5mm inside diameter (.85 in x .37 in). I got these from Home Depot in a pack of 84 assorted springs for $5.
I've designed and printed this with PLA which is plenty strong. I printed 4 perimeter walls thick, although my first test print was only 2 walls thick and was surprisingly strong
Mounts to any GoPro Mount
Four 10mm screws are needed, 2 are optional. You will also need 4 nuts. Hex is required for the adjustment portion, but square will work on the bottom plate as well as the optional controller mount portion.
One 25mm screw for the bottom plate
The springs are
2 springs 22mm x 9.5mm, 7.5mm inside diameter (.85 in x .37 in). I got these from Home Depot in a pack of 84 assorted springs for $5.
I've designed and printed this with PLA which is plenty strong. I printed 4 perimeter walls thick, although my first test print was only 2 walls thick and was surprisingly strong
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
