Thingiverse
DO! or DON'T. Coin
par Captain_Thrax
15
Téléchargements
9
Likes
0
Makes
Decisions, decisions... Leave it to chance! 50/50 odds!
There's 2 separate files one is with extruded wording and one with cut wording.
Flat orientation version is for printing flat on either side.
Coin is 1.25" and 0.150" thick, scale as desired in your slicer.
For best results, print vertically(not flat on either side) 0.1mm above the buildplate with supports touching the buildplate only. Use the flat oriented version if your printer isn't tuned well enough for the vertical versions.
I also added the solidworks files in case you wanted to add your own flair, message me if you need it in a different format to edit.
There's 2 separate files one is with extruded wording and one with cut wording.
Flat orientation version is for printing flat on either side.
Coin is 1.25" and 0.150" thick, scale as desired in your slicer.
For best results, print vertically(not flat on either side) 0.1mm above the buildplate with supports touching the buildplate only. Use the flat oriented version if your printer isn't tuned well enough for the vertical versions.
I also added the solidworks files in case you wanted to add your own flair, message me if you need it in a different format to edit.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
