Dog (HueForge)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.3 PLA+ Sunlu Gray Transmission Distance: 2.5 PLA+ Sunlu Orange Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 6 Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Gray At layer #13 (1.12mm) swap to Orange At layer #17 (1.44mm) swap to White for the rest.