Thingiverse

Dolls bed

by Grizual

8 Downloads

5 Likes

0 Makes

Four poster bed in two variations with tabs and sockets for joining. All the parts will fit on a 220x220mm build area except the side rails so I have included a split side rail version as well. There are ball caps should you wish to just make a standard bed. Everything is printed flat to the bed except the spiral posts which are stood up with a brim and printed at 50mm/sec and all layer height was set to 0.2mm with 30 percent infill.

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

no supports · large print

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

ABS

Min. bed size

220 mm (Large)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Dolls bed?

Any FDM printer should handle Dolls bed just fine. It's been printed on machines like Bambu Lab X1C, Prusa MK4, Creality K1 Max, Anycubic Kobra Max. A minimum build volume of 220 mm is recommended.

Does Dolls bed need supports when printing?

No supports needed for Dolls bed — it's designed to print clean off the bed.

What file format is Dolls bed available in?

Dolls bed is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Dolls bed free to download?

Yes, Dolls bed is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Dolls bed

Add to Collection