Doom 2016 Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 140.25x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #ff6a13 PLA BambuLab Basic Orange Transmission Distance: 7 #ffe17f PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 This print uses 4 unique filaments Swap Instructions: Start with Charcoal At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Orange Border Only Colors from here until the end. At layer #17 (1.44mm) swap to Lemon Yellow for the rest.