Door Hinge for Printer Enclosure

# 270° Acrylic Door Hinge for IKEA PLATSA 3D Printer Enclosure

This is a 3D-printed door hinge designed for a custom 3D printer enclosure based on IKEA PLATSA cabinets.

The enclosure consists of two stacked IKEA PLATSA cabinet frames:

- 1x IKEA PLATSA frame, 60 × 55 × 60 cm, white
- 1x IKEA PLATSA frame, 60 × 55 × 40 cm, white
- 4x wooden feet

The smaller cabinet is placed at the bottom and can be closed with a standard IKEA door. The larger upper cabinet is used as the main printer chamber and is closed with two acrylic doors.

Each acrylic door is approximately:

- 30 × 60 cm
- 3 mm thick

The acrylic doors are mounted externally to the cabinet frame using these printed hinges. The two hinge parts are connected with an 2,5 × 55 mm nail, pin or similar metal rod.

The main advantage of this hinge design is that the doors can rotate up to approximately 270 degrees. This allows the doors to open completely to the side of the enclosure, making it much easier to access the printer, re