Thingiverse
Doorbell Button
by franky99
0
Downloads
0
Likes
0
Makes
I searched everywhere for a 60mm wide, surface mount doorbell button with nameplate. I found nowhere what I was looking for. So I designed myself a model and printed it in ASA-X.
The pushbutton is a Schurter PN: 1241.2801 available at digikey, mouser, reichelt.
The top plate can be printed, or better milled on a CNC router from 3mm aluminum. In the two 2.5mm holes for the nameplate you have to cut M3 threads. 2D plot files are also included (svg).
Same for the nameplate cover (1,5mm alu, or 3D print).
The dimensions of the unit are 60x70x19mm.
The pushbutton is a Schurter PN: 1241.2801 available at digikey, mouser, reichelt.
The top plate can be printed, or better milled on a CNC router from 3mm aluminum. In the two 2.5mm holes for the nameplate you have to cut M3 threads. 2D plot files are also included (svg).
Same for the nameplate cover (1,5mm alu, or 3D print).
The dimensions of the unit are 60x70x19mm.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!