Doorbell rain cover (for Ring Intercom Kit)

Ring doorbell raincover to match intercom kit found at https://ring.com/au/en/products/intercom-kit. It aligns with the black plate, and covers the top two screws. The silver stainless steel plate is decorative and not included in the intercom kit. (Can also be used for non-Ring doorbells) Note that the model is 135mm wide while the kit is 139mm wide. The reason for this is that the black plate has curved edges, so that the cover can’t be in full contact with the black plate if it is the same width. The final edge is a rolled edge to catch the rainwater and ensure it does not flow back towards the doorbell. The cover can be attached with any double-sided tape which is 1 inch or 2.54cm wide. To ensure it is as weatherproof as possible, we recommend using Scotch-Mount™ Extreme Double-Sided Mounting Tape which is for both indoor and outdoor use. Clean print-bed to reduce warping before printing and use a UV resistant material such as PETG. PLA is not suitable for prolonged outdoor use.