Thingiverse
Doorbell
par AdrianBates
2
Téléchargements
5
Likes
0
Makes
A doorbell, designed in a very weird, overly complicated, and probably naïve way.
A little background: I wanted to design an entire doorbell that would work using a small wireless button. I settled on the [Sonoff SNZB-01 Zigbee Switch](https://amzn.to/3Ng2isk) (affiliate link). I also wanted it to "feel" like a doorbell, so I designed it to be used with springs (I used pen springs) to accomplish this.
Please note that this design uses some snap-in pieces, which may or may not work with your print settings, but can usually be coerced with some sanding/cutting. Also, since it's snap-fit, someone could probably rip this off your house if they wanted to.
A little background: I wanted to design an entire doorbell that would work using a small wireless button. I settled on the [Sonoff SNZB-01 Zigbee Switch](https://amzn.to/3Ng2isk) (affiliate link). I also wanted it to "feel" like a doorbell, so I designed it to be used with springs (I used pen springs) to accomplish this.
Please note that this design uses some snap-in pieces, which may or may not work with your print settings, but can usually be coerced with some sanding/cutting. Also, since it's snap-fit, someone could probably rip this off your house if they wanted to.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
