Slicer Discord
Double bolt action pen – 3D-printbaar model van MakerWorld MakerWorld
Office

Double bolt action pen

54 Downloads
30 Likes
15 Makes
Model downloaden
看到辛科凝即将出的双枪栓全中轴中性笔有感而发制作,欢迎改编分享,侵删。去码头整点薯条。双枪栓壳体采用卡扣固定,完全没有使用螺纹,靠圆柱后定位,圆柱和拨钮采用过盈配合。笔芯直径适配到8mm(几乎所有笔芯都可容纳),长度适配111mm(用圆柱长端)和112mm(用圆柱短端)。Inspired by the sight of “PONY XIN”'s upcoming double bolt full center Pen. Welcome to adapt and share.The meaning of life lies in going to the wharf for some fries.The double bolt housing is fixed with clasp, no thread is used at all, and is positioned behind the cylinder. The cylinder and the dial button are fitted with interference. The diameter of the refill is adapted to 8mm (almost all refill can be accommodated), and the length is adapted to 111mm (with the long end of the cylinder) and 112mm (with the short end of the cylinder).
Categorie
Office
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Eendelig Hardware nodig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 1/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
Polycarbonate
Nabewerking
Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie