Slicer Discord
Double Double Pendulum with chaotic behaviour – 3D-Druckmodell von MakerWorld MakerWorld
Physics & Astronomy

Double Double Pendulum with chaotic behaviour

1 Downloads
3 Likes
0 Makes
Zum Modell
This is a double double pendulum - that is, two double pendulums on one pivot. If you set both pendulums going from roughly the same position you'll find that they behave very differently. This is an example of chaotic behaviour, which is also seen in other physical systems such as the weather. Chaotic behaviour refers to the situation where a tiny change in the starting conditions (in this case the position of the pendulums when you let go of them) leads to significant changes in their behaviour. You can see that even if you try and start the two pendulums in exactly the same place, they will end up behaving very differently. I use this model as an example of chaotic behaviour in science talks I give at schools and public science groups. You will need some bearings that are 8 x 22 x 7mm, for example the 608ZZ series. I bought mine from Amazon, but they're easily available from various sources. There are even some models to print your own here on MakerWorld - just search for 60
Kategorie
Physics & Astronomy
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

Robin Wilson veröffentlicht auch auf

6 zusätzliche Modelle auf 1 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

5 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen