Slicer Discord
Double-Sided HexMaille Fabric – Modelo 3D imprimible de MakerWorld MakerWorld
Other Art Models

Double-Sided HexMaille Fabric

56 Descargas
27 Likes
4 Makes
Ver Modelo
This is a double-sided version of my Fast Print Hexmaille Fabric. It doesn't print quite as fast, and it's not quite as flexible, but it's smooth and shiny on both sides!This was originally inspired by TurboDork's NASA Fabric, which used identical interlocking pieces. This design, however, uses hexagonal tiles and separate interlocking rings, which allows the fabric to be a mere 3.2mm thick. The rings are printed right on top of the tiles - kind of like removable supports. They have minimal contact with the tiles below, so they are very easy to break free. I've included an 8x10 grid of tiles as well as a single tile and ring for inspection.PrintingThe layer height needs to be exactly 0.2mm for the clearances to work out correctly. If using PrusaSlicer, you should set the line width for perimeters to 0.45mm for most efficient printing. I used PLA with the 0.2mm layer thickness “speed” profile, but I was able to bump up the all the perimeter speeds 60mm/s. Post PrintingThe process of loo
Categoría
Other Art Models
Fuente
MakerWorld
Publicado
Actualizado
Lo que necesitas para imprimir: Intermedio Confianza media
¿Por qué?
capas de 0.20mm
Pieza única
Soportes 1/3
Ensamblaje 0/3
Ajustes 1/3
Tamaño de cama 0/3
Postproceso 1/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
PLA, ASA
Cama mín.
50 mm (Pequeño)
Altura de capa
0.2 mm
Postprocesado
Lijado
Software
Cura, PrusaSlicer o similar
Mismo diseñador, más plataformas

LoboCNC también publica en

313 modelos adicionales en 1 plataformas más

Verificado por coincidencia de títulos de modelos entre plataformas.
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

6 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección