Slicer Discord
Dr Manhattan (hueforge) – Modelo 3D imprimible de MakerWorld MakerWorld
Hueforge & Lithophane

Dr Manhattan (hueforge)

10 Descargas
12 Likes
9 Makes
Ver Modelo
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 145.62x180mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA Bambulab Charcoal Transmission Distance: 0.3 PLA BambuLab Basic Cyan Transmission Distance: 8 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Cyan At layer #17 (1.44mm) swap to Ivory White At layer #22 (1.84mm) swap to Yellow for the rest. Print will take 3h30m, prepare time included (P1S)
Categoría
Hueforge & Lithophane
Fuente
MakerWorld
Publicado
Actualizado
Lo que necesitas para imprimir: Intermedio Baja confianza
¿Por qué?
impresión grande
Pieza única
Soportes 1/3
Ensamblaje 0/3
Ajustes 1/3
Tamaño de cama 2/3
Postproceso 0/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
PLA
Cama mín.
180 mm (Grande)
Software
Cura, PrusaSlicer o similar
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

6 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección