Dr.Stone Hueforge

Project: Dr Stone.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 149.95x240mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.9mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA Rosa 3D Mint Transmission Distance: 2 PLA Elegoo Red Transmission Distance: 4 PLA BambuLab Basic White Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Mint At layer #7 (0.64mm) swap to Red At layer #9 (0.8mm) swap to Jade White At layer #18 (1.52mm) swap to Yellow for the rest. Comment imprimer plus de 4 couleurs avec un seul AMS: à partir de 42sec sur la vidéo How to print more than 4 colours with a single AMS: from 42 sec onwards in the video