Dragon Ball (Android 18)

Project: 18.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 132.45x199.99mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyTerra Army Blue Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Army Blue At layer #12 (1.04mm) swap to Blue At layer #13 (1.12mm) swap to Gray At layer #16 (1.36mm) swap to Beige At layer #20 (1.68mm) swap to Jade White for the rest.