Dragon Ball C18

Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Cyan PLA BambuLab Basic Pink PLA BambuLab Basic Yellow PLA BambuLab Basic Jade White Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Cyan At layer #13 (1.12mm) swap to Pink At layer #21 (1.76mm) swap to Yellow At layer #23 (1.92mm) swap to Jade White for the rest. The Model is 120x200mm in size You need a different size: Remember, if scaling is desired, modify only the x and y axes; the z-axis must remain unchanged. You need an A1 Mini profile; if you are interested, simply send a message. You can find the matching Hueforge frame here. https://makerworld.com/en/models/2307079-picture-frame-120x200mm#profileId-2518456 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 3.04mm and the Actual Thickness is 2.23919mm