Dragon Bookmark

Segnalibro con immagine di un drago creato con hueforge, stampato volutamente per essere sottile e leggermente flessibile ma resistente. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 50x140.81mm in size You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.9mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Jessie Premium Pure Cyan Transmission Distance: 4 PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Gray At layer #11 (0.96mm) swap to Pure Cyan At layer #17 (1.44mm) swap to White for the rest.