Characters & Creatures STL Download - dragon_drogon_flexibleby mario_3d

Printing Instructions for the Drogon Design Here is this Drogon design, optimized to be printed in a single piece. Here are some tips to ensure a good result: Bed Adhesion: To improve adhesion, I recommend using the Brim option. This will help keep the model stable during printing.Positioning Adjustments:Legs: Once printed, you can rotate the legs 90 degrees to give the figure more stability.Wings: The wings can also be rotated to adjust the pose. If the protrusion that holds the wing open is too large and restricts movement, you can use pliers to trim it slightly until the wing moves more freely. printing parametersno supports needed layer length .2mm filling density 20% pqaredes 3 edge plate adhesion