MakerWorld

Earrings

Dragon earrings (1)

by D3D create by Dario · Earrings

110 Downloads

78 Likes

73 Makes

Not special info for printing You can find the other model of this collection here https://makerworld.com/@dario.comico/collections/1556796 Have good print

Category

Earrings

Source

MakerWorld

Published

08.01.2024

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Dragon earrings (1)?

Any FDM printer should handle Dragon earrings (1) just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Dragon earrings (1) need supports when printing?

Yes, Dragon earrings (1) will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Dragon earrings (1) available in?

Dragon earrings (1) is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Dragon earrings (1) free to download?

Yes, Dragon earrings (1) is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

3 Suggestions

Dragon earrings (1)

Similar Models

Add to Collection