dragon effector v400/SuperRacer

remix of https://www.thingiverse.com/thing:4734896
(Other parts can also be found here)

4 walls min
top/bottom 3mm
infill gyroid / grid
supports bottom only
known materials minimum petg
ideally abs , polycarb, petgcf , pa6

support stock probe ensure this is square to the nozzle
recommended probe (nozzle direct)

probe wire clips https://www.thingiverse.com/thing:5940041


https://www.amazon.ca/Printer-Precision-Z-Probe-Leveling-nozzles/dp/B07V6GR72Q/ref=sr_1_1?crid=1GJ19Z1ONVGZA&keywords=kossel+probe&qid=1680402296&sprefix=kossel+prob%2Caps%2C371&sr=8-1

Top cutout is for adxl
balls simply push in may need to use a screw driver to slightly adjust hole
optional loctight blue on ball stems
4010 fans screws or super glue / contact cement either will work

Hotend mount either screws and, bolts or B 3mm brass inserts x2
Note holes will need a small adjustment for inserts

https://www.amazon.ca/AIEX-Printing-Embedment-Automotive-4-6x5-7mm/dp/B09TNK8GD6