Dragon Eye HueForge

This is a Hueforge I created of a dragons eye. I have not checked the TD of my filaments. But these are the filaments I used and you can see the results. Project: Dragon Eye -1.11.25.hfpPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.08mmThe Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PETG BambuLab Basic Blue Transmission Distance: 2.5 PETG BambuLab Basic Red Transmission Distance: 2.5 PETG BambuLab Basic Orange Transmission Distance: 4.5 PETG BambuLab Basic Yellow Transmission Distance: 6 PLA Default White Transmission Distance: 5This print uses 6 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap Instructions: Start with Black At layer #15 (0.64mm) swap to Blue At layer #17 (0.72mm) swap to Red At layer #27 (1.12mm) swap to Orange At layer