Dragon Hueforge

by Michele MM3D · Household

813 Downloads

115 Likes

0 Makes

Go to Model

Dragon Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.48mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Beige Transmission Distance: 8PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Beige At layer #15 (1.28mm) swap to Jade White for the rest.

Michele MM3D also publishes on

290 additional models across 1 more platforms

MakerWorld

290 models

♥ 15,465 ↓ 33,991 ⚒ 16,371

Frequently Asked Questions

Which 3D printer is suitable for Dragon Hueforge?

Any FDM printer should handle Dragon Hueforge just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Dragon Hueforge need supports when printing?

Yes, Dragon Hueforge will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Dragon Hueforge available in?

Dragon Hueforge is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerOnline.

Is Dragon Hueforge free to download?

Yes, Dragon Hueforge is available as a free download through MakerOnline. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Dragon Hueforge

Similar Models

Add to Collection