Dragon HueForge

Remember if you sant to scale, do it only with x and y axis, z must be the same as original. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PETG JAYO Black Transmission Distance: 0.3 PETG JAYO Gray Transmission Distance: 2.5 PETG GEETECH Gray Transmission Distance: 3 PETG JAYO White Transmission Distance: 6Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Gray At layer #12 (1.04mm) swap to Gray At layer #18 (1.52mm) swap to White for the rest.